Wheel Poke & Inner Clearance Calculator
Enter the original wheel’s width and offset and the new wheel’s to see how much farther out and in it sits — and, with a measured gap, the inner clearance left.
Wheel Poke & Inner Clearance Calculator calculates in your browser.
How far will the new wheel move?
Changing wheel width or offset moves both edges of the wheel. Half of any extra width goes outward and half inward; a lower offset shifts the whole wheel outward, and a higher offset shifts it inward. The result is poke on the outside and a change in inner clearance to the suspension.
Enter both wheels’ widths and offsets to see how far each lip moves. If you measure the gap between the original wheel’s inner lip and the nearest part, the calculator also estimates what would be left. These are wheel positions, not tire positions, and not proof that a wheel fits.
How to use the Wheel Poke & Inner Clearance Calculator
- Choose the units for wheel width and for offsets and clearance.
- Enter the original wheel’s width and offset.
- Enter the new wheel’s width and offset — type a minus sign for a negative offset.
- Optionally enter the inner clearance you measured, then read the outer and inner changes.
How the calculation works
Outer change = (new width − old width) ÷ 2 − (new offset − old offset)
Inner change = (new width − old width) ÷ 2 + (new offset − old offset)
Clearance change = −inner change
Clearance left = measured clearance − inner change
Positive outer change means more poke; positive inner change means less inner clearance.
| Original wheel | New wheel | Outer lip (poke) | Inner lip |
|---|---|---|---|
| 8 in, +40 mm | 9 in, +35 mm | 17.7 mm (0.7 in) farther out | 7.7 mm (0.3 in) farther in |
| 8 in, +40 mm | 8 in, +20 mm | 20 mm (0.79 in) farther out | 20 mm (0.79 in) farther out (more room inside) |
| 8.5 in, +45 mm | 9.5 in, +30 mm | 27.7 mm (1.09 in) farther out | 2.3 mm (0.09 in) farther out (more room inside) |
| 8 in, +40 mm | 9 in, +45 mm | 7.7 mm (0.3 in) farther out | 17.7 mm (0.7 in) farther in |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your wheel measurements and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- Wheel (rim) positions only — a tire’s sidewall bulges past the rim, and a different tire changes the picture.
- Assumes both wheels have similar flanges, so nominal widths are compared.
- Remaining clearance is shown only when you enter a measured starting clearance.
- Doesn’t model suspension travel, steering lock, brake calipers, spoke design, or load — test-fit before buying.
Related calculators
- Tire Size Comparison CalculatorCompare two tire sizes.
- Wheel Offset CalculatorFind a wheel's offset.
- Wheel Backspacing CalculatorFind a wheel's backspacing.
Guides
- Calculating Wheel PokeWork out how much farther out a new wheel sits than the old one from their widths and offsets, with worked examples and the sign convention explained.
- Offset and Inner ClearanceHow offset and width changes move a wheel’s inner lip toward or away from the suspension, and how to work out the clearance left from a measurement.
- Comparing Wheel FitmentA step-by-step way to compare a new wheel with the one on your vehicle: what to measure, what to calculate, and what still needs a test fit.
Wheel Poke & Inner Clearance Calculator FAQ
- How much will a 9-inch +35 wheel poke compared with an 8-inch +40?
- About 17.7 mm farther out: 12.7 mm from half the extra inch of width, plus 5 mm from the lower offset. The inner lip moves 7.7 mm farther in.
- Does a higher offset reduce inner clearance?
- Yes — every millimeter of higher offset moves the wheel a millimeter farther in, on top of half of any extra width.
- Why doesn’t it show the clearance left?
- It needs a starting point. Measure the gap between the original wheel’s inner lip and the nearest part, enter it, and the clearance left is shown.
- Is wheel poke the same as tire poke?
- No. This tracks the wheel’s rim. A tire’s sidewall usually sits a little farther out, especially a wide tire on a narrow rim.
- Does a good result mean the wheel will fit?
- No. Brakes, suspension travel, steering lock, spoke design, and the tire can still cause contact. Test-fit before buying.
- Are the tire sizes, distances, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. The sizes, distances, fuel economy, prices, costs, and results you enter are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


