Tire Size Comparison Calculator
Enter the original tire size and the new one — such as 225/65R17 and 235/60R18 — to compare their diameter, sidewall, width, and what the change does to clearance and speed.
Tire Size Comparison Calculator calculates in your browser.
How do two tire sizes compare?
Two tire sizes can look very different on paper and end up almost the same height — or the other way round. Turning both sizes into the same measurements and putting them side by side shows what really changes: overall diameter, sidewall height, tread width, circumference, and revolutions per mile.
The calculator also shows the knock-on effects of the diameter change: how much the axle rises or falls from the tire alone, and what the speedometer shows against your actual speed. It compares sizes only — it can’t tell you whether a tire fits your vehicle.
How to use the Tire Size Comparison Calculator
- Choose whether to type each tire as a size or as width, aspect ratio, and wheel diameter.
- Enter the original tire, then the new one.
- Read the diameter change first, then the sidewall, width, circumference, and revolutions.
- Check the clearance and speedometer rows, and the side-by-side table, before deciding.
How the calculation works
Diameter = wheel + 2 × (width × aspect ratio ÷ 100) ÷ 25.4
Difference = new − original; percentage = difference ÷ original × 100
Ground clearance change = diameter change ÷ 2
Actual speed = indicated speed × new diameter ÷ original diameter
Nominal figures from each size. A difference within about 3% is a common rule of thumb, not a fitment check.
| Original → new | Diameter change | Ground clearance | At an indicated 60 mph |
|---|---|---|---|
| 225/65R17 → 235/60R18 | 0.59 in larger (+2.06%) | 0.29 in higher (7.45 mm) | 61.2 mph |
| 225/65R17 → 245/65R17 | 1.02 in larger (+3.59%) | 0.51 in higher (13 mm) | 62.2 mph |
| 205/55R16 → 225/45R17 | 0.09 in larger (+0.38%) | 0.05 in higher (1.2 mm) | 60.2 mph |
| 225/65R17 → 245/45R18 | 1.83 in smaller (−6.43%) | 0.92 in lower (23.3 mm) | 56.1 mph |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your tire sizes and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- Compares nominal dimensions only — it doesn’t check fit, load index, speed rating, or rim width.
- Ground clearance is the change from the tire alone; suspension and load change the body’s height separately.
- Speedometer figures assume the speedometer read correctly with the original tires.
- Typed sizes must be metric, such as 225/65R17; flotation sizes aren’t read.
Related calculators
- Tire Sidewall Height CalculatorFind the sidewall height of a tire.
- Tire Diameter CalculatorFind the overall diameter of a tire.
- Tire Circumference CalculatorFind the circumference of a tire.
- Speedometer Error CalculatorEstimate how far a speedometer reads off with a different tire size.
Guides
- Comparing Two Tire SizesCompare two tire sizes such as 225/65R17 and 235/60R18 side by side: diameter, sidewall, width, circumference, and the common 3% rule of thumb.
- Installing Larger TiresWhat happens to speedometer readings, gearing, fuel use, ground clearance, braking, and fit when you move to a taller tire, with a worked example.
- Tire Size, Clearance, SpeedWhy a taller tire raises ground clearance by only half its extra height, what it does to actual speed, and a table of common size changes.
- Calculating Speedometer ErrorThe formula for actual speed after a tire size change, worked examples in mph and km/h, the odometer difference, and how to state the error.
- Comparing Wheel FitmentA step-by-step way to compare a new wheel with the one on your vehicle: what to measure, what to calculate, and what still needs a test fit.
Tire Size Comparison Calculator FAQ
- Is 235/60R18 bigger than 225/65R17?
- Slightly. It is about 29.1 inches tall against 28.52 — 0.59 inches (2.06%) larger — even though its sidewall is 5.25 mm shorter.
- How much ground clearance does a bigger tire add?
- Half the diameter increase, from the tire alone. A tire 0.59 inches taller lifts the axle about 0.29 inches.
- What is the 3% rule?
- A common guideline keeps a replacement within about 3% of the original diameter to limit speedometer and gearing changes. It doesn’t confirm that a tire fits.
- Can this tell me whether a tire fits my car?
- No. Fit also depends on clearance to the fenders and suspension, load index and speed rating, rim width, and the vehicle maker’s approved sizes.
- Can I enter the sizes as numbers instead?
- Yes. Choose width, aspect ratio, and wheel diameter, and enter them for both tires. Boxes for the method you didn’t choose are ignored.
- Are the tire sizes, distances, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. The sizes, distances, fuel economy, prices, costs, and results you enter are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


