Vehicles & EVs
How to Calculate Wheel Poke
Poke is how far a wheel sticks out past where the old one sat. It depends on two things: how much wider the new wheel is, and how its offset compares.
Ready to try the tool this guide describes?
The formula
Outer change = (new width − old width) ÷ 2 − (new offset − old offset), in the same unit. Half of any extra width goes outward, and a lower offset moves the whole wheel outward by the difference. A positive answer means the outer lip sits farther out.
A worked example
An 8-inch wheel at +40 mm is replaced by a 9-inch wheel at +35 mm. Half the extra inch of width is 12.7 mm; the offset drops by 5 mm, which moves the wheel out another 5 mm. The outer lip sits 12.7 + 5 = 17.7 mm farther out.
More examples
| Original wheel | New wheel | Outer change (poke) | Inner change |
|---|---|---|---|
| 8 in, +40 mm | 9 in, +35 mm | 17.7 mm farther out | 7.7 mm farther in |
| 8 in, +40 mm | 8 in, +20 mm | 20 mm farther out | 20 mm farther out |
| 8.5 in, +45 mm | 9.5 in, +30 mm | 27.7 mm farther out | 2.3 mm farther out |
| 7 in, +45 mm | 8 in, +45 mm | 12.7 mm farther out | 12.7 mm farther in |
Wheel poke isn’t tire poke
The formula tracks the wheel’s rim. A tire’s sidewall usually bulges a little past the rim, more so on a narrow rim, and a wider tire adds its own width. Check the tire’s position separately, especially when the new wheel carries a different tire.
Measuring where you start
Poke is a change from the original wheel. To know whether the new position clears the fender, measure the space between the original wheel’s outer lip (or tire) and the fender edge with the vehicle on its wheels, then compare it with the change.
Calculating Wheel Poke FAQ
- How do I calculate wheel poke?
- Take half the width increase and add the drop in offset. An 8-inch +40 mm wheel replaced by a 9-inch +35 mm wheel pokes out 17.7 mm more.
- Does a lower offset increase poke?
- Yes. Every millimeter of lower offset moves the wheel a millimeter farther out.
- Does a wider wheel always poke out more?
- Only if the offset doesn’t rise to compensate. Raising the offset by half the width increase keeps the outer lip where it was.
- Is poke measured on the wheel or the tire?
- This calculation is for the wheel’s rim. The tire can sit farther out than the rim.
- What does a negative poke result mean?
- The new wheel’s outer lip sits farther in than the original’s.
Related guides
- Offset and Inner ClearanceHow offset and width changes move a wheel’s inner lip toward or away from the suspension, and how to work out the clearance left from a measurement.
- Comparing Wheel FitmentA step-by-step way to compare a new wheel with the one on your vehicle: what to measure, what to calculate, and what still needs a test fit.
Open the tool
Jump into Wheel Poke & Inner Clearance Calculator when you are ready to process your files.


