Pallet Layer Calculator
Enter the pallet and the carton footprint in inches, feet, centimeters, or millimeters to see how many cartons fit in one layer and how they’re arranged.
Pallet Layer Calculator calculates in your browser.
The pattern decides the count
How many cartons fit in a pallet layer depends on which way they face. Lining every carton up the same way is simple, but it can leave a strip of pallet too narrow for another row — while turning some of them fills it.
This calculator tries every carton facing one way, every carton turned 90°, and two-block patterns that mix the two at every possible split, and draws the winning pattern to scale. You can add spacing between cartons and choose whether they may overhang the edges; the deck covered, the deck left bare, and any carton area past the edges are reported separately.
How to use the Pallet Layer Calculator
- Choose inches, feet, centimeters, or millimeters.
- Enter the pallet’s length and width.
- Enter the carton’s footprint: its length and width as it sits on the pallet.
- Optionally enter spacing to keep between cartons.
- Choose whether cartons may overhang the edges, and by how much.
How the calculation works
Cartons along a side = (side + spacing) ÷ (carton + spacing), rounded down
One orientation = cartons along the length × cartons across the width
Two-block = a block facing one way, the rest of the pallet filled with cartons turned 90°
Deck covered = the area where cartons and pallet actually overlap
Every carton is placed explicitly and the layout is checked independently — inside the allowed area and at least the spacing apart, including where the two orientations meet. The drawing shows those same positions.
| Pallet | Carton | Spacing | One orientation | Best checked |
|---|---|---|---|---|
| 48 × 40 in | 16 × 12 in | None | 9 | 10 |
| 48 × 40 in | 16 × 12 in | 0.5 in | 6 | 8 |
| 1,200 × 800 mm | 400 × 300 mm | None | 8 | 8 |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your sizes, weights, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- It handles one carton size per layer.
- It checks single orientations and two-block mixes; more complex patterns, such as pinwheels, aren’t tried.
- It doesn’t judge load stability or whether layers should interlock.
- Spacing is kept between cartons, not added at the pallet edges.
Related calculators
- Pallet Overhang CalculatorCheck how far a load extends past the edges of a pallet.
- Cartons Per Pallet CalculatorEstimate how many cartons fit on a pallet.
- Pallet Stack Height CalculatorFind how high a pallet stack can go.
Guides
- Calculating Cartons per PalletA step-by-step method for estimating how many cartons fit on a pallet: cartons per layer, layers under a height limit, and a payload check.
- Planning a Pallet LayerHow to plan the carton pattern for one pallet layer: measure the footprint, try both orientations, check mixed patterns, and keep cartons within the edges.
- Mixed-Orientation LayersHow two-block pallet layer patterns work, when mixing carton orientations fits more than a single orientation, and the limits of checking only these patterns.
- Gaps Between CartonsWhy spacing between cartons can cost whole rows on a pallet layer, how to calculate cartons per row with gaps, and when the gap is worth it.
Pallet Layer Calculator FAQ
- How many 16 × 12 inch cartons fit on a 48 × 40 inch pallet layer?
- 10, with two rows lengthwise and the rest turned 90°. Facing all one way, the most is 9.
- What is a mixed-orientation pallet pattern?
- A layer where some cartons face one way and the rest are turned 90°, so a leftover strip of pallet gets used. The calculator checks two-block patterns of this kind.
- Does spacing between cartons change the count?
- It can, a lot. Keeping 0.5 in between 16 × 12 in cartons on a 48 × 40 in pallet drops the best single orientation from 9 to 6; mixing orientations gets 8.
- Is the result the best possible pattern?
- It is the best of the patterns checked. More complex arrangements aren’t tried, so occasionally one could fit more.
- What happens if I allow overhang?
- Cartons may reach past the edges by up to your allowance. The deck covered and the carton area past the edges are shown separately.
- Are the sizes, weights, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your sizes, weights, prices, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


