Cartons Per Pallet Calculator
Enter the pallet, the carton, and your height and weight limits in inches, feet, centimeters, or millimeters to estimate how many cartons fit on one pallet.
Cartons Per Pallet Calculator calculates in your browser.
Cartons per layer, layers per pallet, and what stops the count
How many cartons fit on a pallet comes down to three things: how many fit in one layer, how many layers fit under your height limit, and whether the weight runs out first. Get any of them wrong and the estimate is off by a whole layer or more.
This calculator lays out each layer — including two-block patterns that mix carton orientations — stacks layers up to the height or layer count you set, and caps the total at your payload limit, showing any partial top layer. With Keep upright off, it also compares standing cartons on their sides and ends and picks the position that gives the most cartons under every limit.
How to use the Cartons Per Pallet Calculator
- Choose inches, feet, centimeters, or millimeters.
- Enter the pallet’s length, width, and empty height.
- Enter the carton’s length, width, and height, and whether it must stay upright.
- Choose to stack up to a maximum height or to a number of layers.
- Optionally enter carton weight, a payload limit, an empty pallet weight, and an overhang allowance.
How the calculation works
Cartons per layer = the best of the layouts checked
Layers = (maximum height − pallet height) ÷ carton height, rounded down
Cartons allowed by weight = payload limit ÷ carton weight, rounded down
Total = the smaller of the two; any leftover forms a partial top layer
Each carton position is worked out under every limit you enter, and the one with the most cartons is chosen — not simply the one with the most per layer.
| Pallet | Carton | Limits | Per layer | Cartons |
|---|---|---|---|---|
| 48 × 40 in, 6 in high | 16 × 12 × 10 in | 60 in high | 10 (2 rows lengthwise, the rest turned) | 50 |
| 48 × 40 in, 6 in high | 16 × 12 × 10 in | 60 in high; 30 lb each, 1,000 lb payload | 10 (2 rows lengthwise, the rest turned) | 33 |
| 1,200 × 800 mm, 144 mm high | 400 × 300 × 250 mm | 1,600 mm high | 8 (all cartons turned 90°) | 40 |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your sizes, weights, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- It is geometry and arithmetic: it doesn’t check carton strength, load stability, wrapping, or any carrier’s or warehouse’s rules.
- Every layer uses the same pattern, and patterns are limited to single orientations and two-block mixes.
- Cartons stay within the pallet edges unless you allow overhang.
- It assumes identical rectangular cartons and a flat pallet deck.
Related calculators
- Pallet Overhang CalculatorCheck how far a load extends past the edges of a pallet.
- Pallet Layer CalculatorLay out how many cartons fit in one pallet layer.
- Pallet Stack Height CalculatorFind how high a pallet stack can go.
Guides
- Calculating Cartons per PalletA step-by-step method for estimating how many cartons fit on a pallet: cartons per layer, layers under a height limit, and a payload check.
- Height vs Weight LimitsHow to tell whether a pallet load is limited by height or by weight, how partial top layers happen, and what changes when each limit applies.
- Turning Cartons on Their SideWhen standing cartons on a side or end fits more on a pallet, when it doesn’t, and why markings, contents, and carton strength come first.
- Planning a Pallet LayerHow to plan the carton pattern for one pallet layer: measure the footprint, try both orientations, check mixed patterns, and keep cartons within the edges.
- Calculating Stack HeightHow to work out a loaded pallet’s height and the most layers under a height limit, with inch and millimeter examples and the room left over.
Cartons Per Pallet Calculator FAQ
- How do I calculate how many cartons fit on a pallet?
- Find how many fit in one layer and how many layers fit under your height limit, then multiply. On a 48 × 40 in pallet 6 in high, 16 × 12 × 10 in cartons fit 10 to a layer and 5 layers under 60 in: 50 cartons.
- What if the weight limit is reached first?
- The payload limit caps the total. At 30 lb a carton and a 1,000 lb payload, only 33 cartons are allowed — 3 full layers of 10 and 3 cartons on a partial top layer.
- Why can mixing carton orientations fit more?
- A single orientation can leave a strip of pallet too narrow for another row. Two rows of 16 × 12 in cartons lengthwise and the rest turned fill a 48 × 40 in layer with 10 instead of 9.
- Should I turn cartons on their side to fit more?
- Only if the contents allow it. With Keep upright off, the calculator compares each position under your limits — but cartons marked this side up must stay upright.
- Does a geometric fit mean the pallet is safe?
- No. The count shows what fits by size and weight; it doesn’t check carton strength, load stability, wrapping, or handling rules.
- Are the sizes, weights, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your sizes, weights, prices, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


