Shipping & packaging
How to Calculate Pallet Stack Height
A loaded pallet’s height is simple addition: the pallet plus every layer. Working backwards from a height limit takes one division and a careful round-down.
Ready to try the tool this guide describes?
Loaded height
Loaded height = empty pallet height + layers × carton height. A 6 in pallet with 5 layers of 10 in cartons is 6 + 50 = 56 in tall.
Most layers under a limit
Subtract the pallet height from the limit, divide by the carton height, and round down: (60 − 6) ÷ 10 = 5.4, so 5 layers fit under 60 in, with 4 in to spare.
Worked examples
| Pallet | Carton height | Height limit | Most layers | Loaded height | Room left |
|---|---|---|---|---|---|
| 6 in | 10 in | 60 in | 5 | 56 in | 4 in |
| 6 in | 12 in | 72 in | 5 | 66 in | 6 in |
| 144 mm | 250 mm | 1,800 mm | 6 | 1,644 mm | 156 mm |
Exactly on the limit
If the numbers divide exactly, the last layer reaches the limit with nothing to spare. A 6 in pallet with 9 in cartons under a 60 in limit fits exactly 6 layers. Measure again before relying on a zero margin.
Common slips
- Leaving out the pallet’s own height.
- Rounding a fraction of a layer up.
- Measuring one carton when heights vary between them.
Calculating Stack Height FAQ
- How tall is a pallet with 5 layers of 10 inch cartons?
- 56 in on a 6 in pallet: 6 + 5 × 10.
- How many layers fit under 60 inches?
- With a 6 in pallet and 10 in cartons, 5 — a sixth would reach 66 in.
- What if the layers fit the limit exactly?
- The load reaches the limit with no margin. With 9 in cartons on a 6 in pallet, 6 layers make exactly 60 in.
- Do I measure the pallet height loaded or empty?
- Empty. Then add the layers on top.
- How do I convert a stack height to centimeters?
- Multiply inches by 2.54. A 56 in load is 142.24 cm.
Related guides
- Measuring Loaded Pallet HeightWhat counts toward a loaded pallet’s height — the deck, the layers, slip sheets, top caps, and bulges — and how to measure it against a height limit.
- Geometric vs Safe Stack HeightWhy the most layers that fit under a height limit isn’t the same as a safe stack: carton strength, load stability, conditions, and who decides.
Open the tool
Jump into Pallet Stack Height Calculator when you are ready to process your files.


