Shipping & packaging
Pallet Overhang vs Unused Pallet Space
Overhang and unused deck space are opposite mismatches between a load and its pallet. Both mean the load doesn’t match the pallet’s footprint, but they cause different trouble — and one load can have both at once.
Ready to try the tool this guide describes?
Two kinds of mismatch
| Overhang | Unused pallet space | |
|---|---|---|
| What it is | Load reaching past a pallet edge | Deck left uncovered inside the edges |
| What’s at risk | Unsupported carton edges | Space paid for but not used; a load that can shift |
| Sign in the math | (load − pallet) ÷ 2 is positive | (load − pallet) ÷ 2 is negative |
Why overhang matters
Corrugated cartons carry most of their stacking load through their walls and corners. When a carton’s edge sits past the deck, that part of the wall has nothing beneath it, and the carton can sag or crush there. Overhanging edges are also the first thing to catch on forks, racking, or the next pallet.
Why unused space matters
A load that leaves deck showing is fully supported, but the pallet still takes up its whole footprint on a truck or in a rack. Loads that sit well inside the edges can also slide in transit unless they are wrapped or strapped firmly.
One load, both problems
A load can overhang one way and fall short the other. A 1,180 × 1,030 mm load centered on a 1,200 × 1,000 mm pallet leaves 10 mm of deck showing at each end and overhangs each side by 15 mm. Of the pallet’s 1.2 m² deck, 0.02 m² is left uncovered, while 0.0354 m² of the load hangs past the sides.
Which to fix first
- Overhang, almost always: it puts cartons at risk, while unused space mostly costs room.
- If the load is the wrong shape for the pallet, try turning it 90° before re-stacking.
- If cartons don’t divide neatly into the pallet, a pattern that leaves a little deck showing is usually safer than one that overhangs.
Overhang vs Unused Space FAQ
- Is unused pallet space a problem?
- Not for the cartons, which are fully supported, but you still ship and store the pallet’s whole footprint, and a small load can shift if it isn’t secured.
- Can a pallet load have overhang and unused space at the same time?
- Yes — along different directions, or at opposite edges when it is off center. That is why each edge is measured separately.
- Does deck left showing count as negative overhang?
- In the arithmetic, yes: the difference comes out negative. In practice it is unused pallet space, not overhang, and the cartons above it are supported.
- Why do overhanging cartons get damaged?
- Their walls and corners carry the weight of the stack, and the part past the pallet edge has nothing underneath to push back.
- Is it better to overhang slightly or leave deck showing?
- Leaving a little deck showing is generally the safer mismatch, because every carton stays supported. Check what whoever handles the pallet expects.
Related guides
- Calculating Pallet OverhangA step-by-step method for working out how far a load overhangs each edge of a pallet, with centered and off-center examples in inches and millimeters.
- Fixing Pallet OverhangPractical ways to remove pallet overhang — re-centering the load, turning it, changing the stacking pattern, or using a larger pallet — with worked figures.
Open the tool
Jump into Pallet Overhang Calculator when you are ready to process your files.


