Illustration of a load on a pallet being turned a quarter turn so that it sits inside the pallet edges

Shipping & packaging

How to Fix Pallet Overhang

Once you know a load overhangs, the fix is usually one of four things: center it, turn it, re-stack it, or change the pallet. Which one works depends on whether the load is too big overall or just in the wrong place.

Ready to try the tool this guide describes?

First, check it’s centered

An off-center load can overhang even when it is no bigger than the pallet. A 46 × 40 in load on a 48 × 40 in pallet, shifted 3 in toward one end, overhangs that end by 2 in while 4 in of deck shows at the other. Re-centered, it leaves 1 in of deck showing at each end and sits flush along the sides.

Then try turning it

If the load’s long side runs across the pallet’s short side, turning it 90° can help. A 40 × 46 in load placed with its 40 in side along a 48 × 40 in pallet’s length overhangs each side by 3 in. Turned so the 46 in side runs along the length, it leaves 1 in of deck at each end and sits flush on the sides.

Change the stacking pattern

When cartons don’t divide neatly into the pallet, the layer pattern decides the footprint. Four 24 × 20 in cartons in a 2 × 2 block make a 48 × 40 in layer that matches a 48 × 40 in pallet exactly; the same cartons laid three in a row would make a layer 60 or 72 in long and overhang badly. Compare the footprint each pattern produces before you stack.

Use a bigger pallet — or a smaller layer

  • If every pattern overhangs, the load is too big for the pallet: use a larger pallet, or take one carton out of each layer.
  • Check that a bigger pallet still fits the truck, rack, or dock it is going to.
  • Cartons that are only a little too big may come in a smaller case pack from the supplier.

Check again after wrapping

Stretch wrap pulls cartons inward, but it can also drag a loose top layer out of line. Measure the finished load at its widest point before it ships.

Fixing Pallet Overhang FAQ

What is the quickest fix for pallet overhang?
Re-center the load, then try turning it 90°. Both cost nothing and often remove a small overhang entirely.
Will turning the load 90° always help?
Only when the load’s longer side runs across the pallet’s shorter side. If the load is bigger than the pallet in both directions, turning it just moves the overhang.
Can stretch wrap fix overhang?
No. Wrap holds the load together, but cartons past the edge are still unsupported.
What if the cartons can’t be stacked without overhang?
Use a larger pallet, put fewer cartons in each layer, or ask the supplier about a smaller case size.
How do I check a stacking pattern before building it?
Multiply each carton dimension by how many cartons sit along that direction, and compare the layer’s footprint with the pallet.

Related guides

Open the tool

Jump into Pallet Overhang Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.