Length + Girth Calculator
Enter a package’s three sides in inches or centimeters to see its length, girth, and length plus girth, and compare them with a limit you enter.
Length + Girth Calculator calculates in your browser.
One number made from two measurements
Length plus girth adds the longest side to the distance around the package: length + 2 × (width + height). Carriers use it as a size limit because one figure catches both long, thin parcels and short, fat ones.
Enter the sides in any order and the calculator picks the length and shows the length, the girth, and their total separately, in inches and centimeters. Enter the limit from your carrier’s current rules to see how much room is left — or, if you are over, how short the longest side would need to be, including when another side would become the length.
How to use the Length + Girth Calculator
- Choose inches or centimeters.
- Enter the three outside sides of the packed box, in any order.
- Choose whether to round each side up to a whole inch or centimeter.
- Optionally enter the length + girth limit from your carrier’s current rules.
- Read the length, girth, and total, and how they compare with your limit.
How the calculation works
Length = the longest side
Girth = 2 × (the other two sides)
Length + girth = length + girth
Longest side allowed under a limit = limit − 2 × (the other two), or, if that is shorter than the middle side, (limit − middle − 2 × shortest) ÷ 2
When the longest side would have to drop below the middle side, the middle side becomes the length, so the second formula applies. Every suggested length is worked forward again, with the same rounding, before it is shown.
| Package | Rounding | Length + girth | Girth |
|---|---|---|---|
| 20 × 12 × 8 in | None | 60 in | 40 in (101.6 cm) |
| 36 × 10 × 10 in | None | 76 in | 40 in (101.6 cm) |
| 45.5 × 30.2 × 20 cm | Whole centimeters | 148 cm | 102 cm (40.16 in) |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your sizes, weights, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- It compares with a limit you enter. It doesn’t know any carrier’s current limits, maximum lengths, or weight rules.
- It assumes a rectangular box; tubes and irregular parcels may be measured differently.
- Rounding happens in the unit you choose, and whole inches and whole centimeters can round the same box differently.
- Measure the packed box at its widest, including any bulge.
Related calculators
- Custom DIM Divisor CalculatorApply a dimensional-weight divisor you enter.
- Maximum Box Size for Target DIM Weight CalculatorFind the largest box that stays under a target dimensional weight.
- Package Girth CalculatorFind the girth of a package.
Guides
- What Is Package GirthWhat package girth means, how it differs from length and volume, why carriers measure it, and how to work it out for a box in inches or centimeters.
- Calculating Length + GirthA step-by-step method for working out a package’s length plus girth in inches or centimeters, with worked examples, rounding, and common slips.
- Length + Girth vs DIM WeightHow a package’s length plus girth and its dimensional weight differ, why carriers use both, and how one box can pass one check and be affected by the other.
- Reducing Length + GirthWhich box dimension to trim to lower length plus girth fastest, why the short sides count double, and what happens when the length stops being the longest side.
Length + Girth Calculator FAQ
- How do I calculate length plus girth?
- Take the longest side as the length and add twice the sum of the other two. A 20 × 12 × 8 in box is 20 + 2 × (12 + 8) = 60 in.
- Does it matter which side I call the length?
- Yes — it must be the longest side. Calling a shorter side the length gives a different, wrong total. The calculator picks the longest side for you.
- How short does my box need to be to meet a limit?
- Each inch off the longest side lowers length + girth by 1 in, but each inch off one of the other sides lowers it by 2 in. Against a 50 in limit, the 20 × 12 × 8 in box would need its 20 in side cut to 11 in — and then the 12 in side becomes the length.
- Is length plus girth the same as dimensional weight?
- No. Length plus girth is a size measured in inches or centimeters; dimensional weight turns a box’s volume into a billing weight. A package can be within one and still be affected by the other.
- What limit should I enter?
- The one in your carrier’s current published rules for the service you use. No limit is built in, because limits differ between carriers and services and change over time.
- Are the sizes, weights, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your sizes, weights, prices, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


