Shipping & packaging
How to Calculate Length Plus Girth
Length plus girth turns a box’s three sides into one size figure: the longest side plus twice the other two. It is quick to work out, but it is easy to pick the wrong side as the length or to round in the wrong place.
Ready to try the tool this guide describes?
The formula
Length + girth = L + 2 × (W + H), where L is the longest side and W and H are the other two. In words: the longest side, plus the distance once around the package.
Step by step
- Measure the three outside sides of the packed box.
- Take the longest as the length.
- Add the other two sides and double the result: that is the girth.
- Add the length and the girth.
Worked examples
| Box | Length | Girth | Length + girth |
|---|---|---|---|
| 20 × 12 × 8 in | 20 in | 40 in | 60 in |
| 36 × 10 × 10 in | 36 in | 40 in | 76 in |
| 14 × 14 × 14 in | 14 in | 56 in | 70 in |
| 60 × 40 × 30 cm | 60 cm | 140 cm | 200 cm |
With rounding
If sides are rounded up to whole units, round before you add anything. A 45.5 × 30.2 × 20 cm box becomes 46 × 31 × 20 cm, giving 46 + 2 × (31 + 20) = 148 cm — not the 145.9 cm the unrounded sides give.
Common slips
- Calling a shorter side the length: for the 20 × 12 × 8 in box, using 12 in as the length gives 12 + 2 × (20 + 8) = 68 in, not 60 in.
- Doubling the length instead of the girth.
- Mixing inches and centimeters in one sum.
Calculating Length + Girth FAQ
- What is the length plus girth of a 20 × 12 × 8 inch box?
- 60 in: the 20 in length plus a 40 in girth, 2 × (12 + 8).
- Is length plus girth measured in inches or cubic inches?
- Plain inches (or centimeters). It adds distances, not volumes.
- What happens if I use the wrong side as the length?
- You get a different total. Using 12 in as the length of a 20 × 12 × 8 in box gives 68 in instead of 60 in.
- What is the length plus girth of a cube?
- Five times one side: one side for the length plus four for the girth. A 14 in cube is 70 in.
- Should I round before or after adding?
- If your carrier rounds each side, round each side first, then add. Rounding only the final total can give a smaller figure than the carrier’s.
Related guides
- Length + Girth vs DIM WeightHow a package’s length plus girth and its dimensional weight differ, why carriers use both, and how one box can pass one check and be affected by the other.
- Reducing Length + GirthWhich box dimension to trim to lower length plus girth fastest, why the short sides count double, and what happens when the length stops being the longest side.
Open the tool
Jump into Length + Girth Calculator when you are ready to process your files.


