← Back to Vehicle, EV & Driving Tools

Gear Ratio RPM / Speed Calculator

Enter a road speed (or engine rpm), the transmission gear ratio, the final-drive ratio, and your tire to estimate engine rpm (or road speed), wheel rpm, and driveshaft rpm.

Checking tool availability…

Gear Ratio RPM / Speed Calculator calculates in your browser.

What rpm will the engine turn at this speed?

Engine speed and road speed are tied together by three numbers: the ratio of the gear you are in, the final-drive (axle) ratio, and how many times the tires turn in a mile. Multiply the wheel rpm by both ratios and you have engine rpm; divide engine rpm by them and you are back at the wheels.

Enter either a road speed or an engine rpm, the two ratios, and the tire — as a size like 225/65R17, its overall diameter, or a published revolutions-per-mile figure. The calculator shows engine rpm or road speed, wheel rpm, driveshaft rpm, and the overall ratio. It is a mechanical estimate, useful for comparing gears, tires, and axle ratios before you change them.

How to use the Gear Ratio RPM / Speed Calculator

  1. Choose whether to find engine rpm at a speed, or road speed at an rpm.
  2. Enter the speed in mph or km/h, or the engine rpm.
  3. Enter the transmission gear ratio and the final-drive ratio.
  4. Enter the tire as a size, its parts, its overall diameter, or revolutions per mile.
  5. Read engine rpm (or speed), wheel rpm, driveshaft rpm, and the overall ratio.

How the calculation works

Wheel rpm = speed (mph) × tire revolutions per mile ÷ 60

Driveshaft rpm = wheel rpm × final-drive ratio

Engine rpm = wheel rpm × transmission ratio × final-drive ratio

Speed (mph) = engine rpm ÷ (transmission ratio × final-drive ratio) × 60 ÷ revolutions per mile

km/h ÷ 1.609344 = mph

Assumes a fixed mechanical connection with no torque-converter, clutch, or CVT slip.

Gear Ratio RPM / Speed Calculator examples
Speed and tireGear × final driveEstimated engine rpmWheel rpm
60 mph, 700 revolutions per mile1.00 × 3.502,450 rpm700 rpm
70 mph on 225/65R170.70 × 3.732,154 rpm825 rpm
100 km/h, 700 revolutions per mile1.00 × 3.502,537 rpm725 rpm

Calculated on your device

  • The calculation runs in your browser as you type; nothing is sent to a server.
  • The figures you enter and the results are not sent to Looty Tools or stored.
  • The calculator area is masked from session-recording analytics.

Limitations

  • A mechanical estimate: torque-converter slip, an unlocked converter, clutch slip, and wheel spin all make real engine rpm differ.
  • A CVT has no fixed gear ratio, so its rpm can’t be predicted from one ratio.
  • Tire revolutions from a size or diameter are nominal; a loaded, worn, or under-inflated tire turns slightly more per mile.
  • Gear and axle ratios must come from your vehicle’s documentation; this calculator doesn’t look them up.

Related calculators

Gear Ratio RPM / Speed Calculator FAQ

How do I calculate engine rpm from speed?
Find the wheel rpm — speed in mph × tire revolutions per mile ÷ 60 — then multiply by the transmission gear ratio and the final-drive ratio. At 60 mph on a tire that turns 700 times a mile, with a 1.00 gear and a 3.50 axle, the engine turns about 2,450 rpm.
What is an overdrive gear ratio?
A ratio below 1.0, such as 0.70. The transmission output turns faster than the engine, so the engine runs slower at a given road speed. A ratio of exactly 1.0 is direct drive.
Why is my tachometer different from the result?
An automatic’s torque converter can slip when it isn’t locked, a clutch can slip, and a CVT changes ratio continuously. Tire wear and inflation also change revolutions per mile slightly. The calculator shows the fixed mechanical figure.
Where do I find my gear ratios?
In the owner’s manual, the transmission maker’s specifications, a build sheet, or an axle tag on the differential. Final-drive ratios are often written like 3.73:1.
Can I use km/h?
Yes. Choose km/h and the calculator converts with the exact mile (1.609344 km). Switching the unit converts the speed you typed.
Does this work for front-wheel-drive cars?
Yes. A transaxle combines the transmission and final drive in one unit; the same ratios apply. The driveshaft figure is then the speed of the output inside the transaxle.
Are the tire sizes, distances, and prices I enter sent anywhere?
No. The calculation runs in your browser as you type. The sizes, distances, fuel economy, prices, costs, and results you enter are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.