Vehicles & EVs
Final Drive Ratio vs Transmission Gear Ratio Explained
A drivetrain has two sets of ratios in series: the transmission, whose ratio changes as you shift, and the final drive, whose ratio is fixed. Engine speed depends on both, but each one controls a different part of the chain.
Ready to try the tool this guide describes?
Where each ratio sits
The transmission sits between the engine and the driveshaft; its gear ratio sets engine rpm relative to driveshaft rpm. The final drive sits between the driveshaft and the wheels; its ratio sets driveshaft rpm relative to wheel rpm. Wheel speed is fixed by road speed and tire size.
The overall ratio is the product
Multiply the two to get the overall ratio — how many times the engine turns per wheel turn. A 2.34 second gear with a 3.42 final drive gives 8.003:1; a 0.69 sixth gear with the same axle gives 2.36:1.
| Gear × final drive | Overall ratio | Speed | Driveshaft rpm | Engine rpm |
|---|---|---|---|---|
| 2.34 × 3.42 | 8.003:1 | 40 mph | 1,613 rpm | 3,773 rpm |
| 0.69 × 3.42 | 2.36:1 | 70 mph | 2,822 rpm | 1,947 rpm |
Same overall ratio, different parts
Different combinations can land on nearly the same overall ratio. On 225/65R17 tires at 70 mph, a 0.75 gear with a 3.42 axle (2.565:1) turns the engine about 2,116 rpm, while a 0.69 gear with a 3.73 axle (2.574:1) turns it about 2,124 rpm.
Which one to change
- A final-drive change shifts every gear at once, which suits a large tire-size change.
- Transmission ratios are usually fixed by the gearbox design; changing them means a different transmission or gear set.
- Either way, check the effect on engine rpm in the gears you actually use.
Final Drive vs Gear Ratio FAQ
- Which ratio affects driveshaft rpm?
- Only the final drive, for a given wheel speed. The transmission ratio decides engine rpm relative to the driveshaft.
- How do I get the overall gear ratio?
- Multiply the transmission gear ratio by the final-drive ratio. 0.69 × 3.42 is 2.36:1.
- Does a transfer case add another ratio?
- In low range, yes — multiply by its ratio too. In high range it is usually 1:1.
- Why do automatics list several ratios but only one final drive?
- The final drive is a single fixed gear set; the transmission changes ratio as it shifts.
- Can I compare two vehicles by final drive alone?
- Not reliably. Compare overall ratios in the same gear, with the tire sizes they use.
Related guides
- Final Drive and Driveshaft RPMHow the axle ratio sets driveshaft speed for a given wheel speed, with driveshaft rpm for five common ratios and the percentage change when you swap gears.
- What 3.73 Gears MeanWhat a 3.73:1 axle ratio means in turns, teeth, and rpm, how it compares with 3.42 and 4.10, and what it does to driveshaft and engine speed at 60 mph.
- Engine RPM From Road SpeedWork out engine rpm at any road speed from tire revolutions per mile, the gear ratio, and the final drive — with a worked 65 mph example and a quick table.
Open the tool
Jump into Final Drive RPM Calculator when you are ready to process your files.


