Cartons Per Container Calculator
Enter the container’s inside size and the carton in inches, feet, centimeters, or millimeters to estimate how many identical cartons fit when floor-loaded.
Cartons Per Container Calculator calculates in your browser.
Identical cartons, floor-loaded: layers, patterns, and the volume ceiling
Floor-loading identical cartons into a container is a grid problem: how many fit across the width and along the length in one layer, and how many layers fit under the ceiling. Dividing the container’s volume by a carton’s volume overstates the answer, because the leftover strips along the walls and above the top layer can’t hold a whole carton.
This calculator builds each floor layer from straight, turned, and mixed patterns, checks every carton’s position, stacks the same pattern up to the ceiling, and compares carton positions when they may be turned. It reports the count, the volume used and unused, and the volume ceiling so you can see how far a real arrangement falls short of it.
How to use the Cartons Per Container Calculator
- Choose inches, feet, centimeters, or millimeters.
- Enter the container’s inside length, width, and height.
- Enter the carton’s length, width, and height, and whether it must stay upright.
- Optionally enter spacing between cartons and clearance from the walls and ceiling.
- Optionally enter a carton weight and a payload limit.
How the calculation works
Cartons per layer = the best floor pattern checked
Layers = usable height ÷ carton height, rounded down
Cartons = per layer × layers, capped at payload ÷ carton weight
Volume ceiling = inside volume ÷ carton volume, rounded down (an upper bound, not a count)
Each carton position is worked out under every limit you enter, and the one with the most cartons is chosen. The count is the best of the arrangements checked, not a proof that no better one exists.
| Container inside | Carton | Cartons | Volume used |
|---|---|---|---|
| 232 × 92 × 94 in | 24 × 16 × 12 in, upright | 357 | 81.99% |
| 232 × 92 × 94 in | 18 × 12 × 10 in, upright | 855 | 92.05% |
| 5,900 × 2,350 × 2,390 mm | 600 × 400 × 300 mm, upright | 357 | 77.57% |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your sizes, weights, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- Identical rectangular cartons only, with one floor pattern repeated in every layer.
- Patterns are single orientations and two-block mixes; it is the best of the arrangements checked.
- It uses the sizes you enter; it doesn’t know any container’s dimensions or payload.
- It doesn’t check carton strength, crushing, weight distribution, securing, or door access.
Related calculators
- Cartons Per Pallet CalculatorEstimate how many cartons fit on a pallet.
- Pallets Per Container CalculatorEstimate how many pallets fit in a container.
- Container Loading CalculatorPlan how a load fills a container from the sizes you enter.
- Container Space Utilization CalculatorSee how much of a container's space a load uses.
Guides
- Calculating Cartons per ContainerCount identical cartons into a container layer by layer — floor pattern, layers under the ceiling, and a payload check — with worked inch and metric examples.
- Why Volume Overstates Carton CountWhy dividing a container’s volume by a carton’s volume gives a count you can’t reach, where the missing cartons go, and how to use the volume figure properly.
- Floor-Loaded vs Palletized CartonsCompare how many cartons a container holds floor-loaded and on pallets, what the pallets cost in space, and what they give back in handling.
- Setting a Utilization TargetHow to choose a realistic container utilization target from your own cartons, track the volume left to reach it, and spot a target no layout can meet.
Cartons Per Container Calculator FAQ
- How do I calculate how many cartons fit in a container?
- Find how many cartons fit in one floor layer, then how many layers fit under the ceiling, and multiply. In an example container 232 × 92 × 94 in inside, 24 × 16 × 12 in cartons fit 51 per layer and 7 layers: 357 cartons.
- Why isn’t the answer the container volume divided by the carton volume?
- That division ignores the leftover strips along the walls and above the top layer. In the same example it gives 435, but only 357 fit in the arrangements checked — volume is an upper bound, not a count.
- Should cartons be turned on their sides to fit more?
- Sometimes, but only if the contents allow it. With Keep upright off, the calculator compares each position; in the example, upright still wins with 357 against 330 on the side and 327 on the end.
- Is the count the most cartons that could ever fit?
- No. It is the best of the arrangements checked: one floor pattern repeated in every layer. Mixed layers or cartons turned to fill space at the top may fit more.
- Does the count check weight or crushing?
- Only against a payload limit you enter. It doesn’t check carton strength, weight distribution, or securing.
- Are the sizes, weights, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your sizes, weights, prices, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


