Box Clearance Calculator
Enter a box’s inside size and a product’s size in inches, centimeters, or millimeters to see the room left along each axis and on each side when centered.
Box Clearance Calculator calculates in your browser.
How much room is left, and where
Clearance is the gap between a product and the inside of its box. The total gap along each axis says how much bigger the box is; split in half, it is the room on each side when the product is centered — the space padding or void fill has to take up.
Enter the box’s inside dimensions and the product’s size. By default the product goes in as entered, length along length; choose the roomiest orientation to try all six square-on placements and use the one with the most room at its tightest point. The result always names the orientation used and adds the unused volume and the share of the box the product takes up, for context.
How to use the Box Clearance Calculator
- Choose inches, centimeters, or millimeters.
- Enter the box’s inside length, width, and height.
- Enter the product’s length, width, and height.
- Keep As entered, or choose Roomiest orientation to try all six.
- Read the clearance along each axis and on each side.
How the calculation works
Clearance along an axis = box inside side − product side
Clearance per side (centered) = clearance along the axis ÷ 2
Unused volume = box inside volume − product volume
Share occupied = product volume ÷ box inside volume × 100
If the product is too big in the orientation checked, the calculator says so, says whether another orientation fits, and leaves the volume figures out until it does.
| Box (inside) | Product | Orientation | Per side (L · W · H) | Occupied |
|---|---|---|---|---|
| 12 × 10 × 8 in | 11 × 9 × 7 in | As entered | 0.5 in · 0.5 in · 0.5 in | 72.19% |
| 16 × 12 × 10 in | 14 × 9 × 6 in | As entered | 1 in · 1.5 in · 2 in | 39.38% |
| 30 × 20 × 15 cm | 18 × 25 × 12 cm | Roomiest | 2.5 cm · 1 cm · 1.5 cm | 60% |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your sizes, weights, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- It assumes a rectangular product and box and square-on placement.
- Per-side figures assume the product is centered; resting on the bottom puts all the height clearance on top.
- Unused volume is the spare room around one product — not how much void fill to buy or how fill material packs.
- Use inside dimensions; outside sizes include the board.
Related calculators
- Box Volume CalculatorFind the volume of a box from its dimensions.
- Dunnage / Void-Fill Cost CalculatorEstimate the cost of void fill from the price you enter.
- Product-to-Box Fit CalculatorCheck whether a product fits inside a box.
Guides
- Why Volume Isn’t FitWhy a product with less volume than a box can still fail to fit, how the sorted-sides test works instead, and when volume is a useful packing figure.
- Calculating Box ClearanceHow to work out the clearance around a product inside a box along each axis and on each side, with worked inch and centimeter examples.
- Total vs Per-Side ClearanceThe difference between total clearance along an axis and clearance per side, why centering halves it, and how orientation changes where the room ends up.
- Snug vs Roomy BoxThe trade-offs between a snug box and a roomy one — protection, void fill, size, and dimensional weight — and how to decide how much clearance to leave.
Box Clearance Calculator FAQ
- How do I calculate the clearance inside a box?
- Subtract each product side from the box’s matching inside side. An 11 × 9 × 7 in product in a 12 × 10 × 8 in box has 1 in of clearance along each axis.
- What is clearance per side?
- Half the clearance along an axis, with the product centered. The same 1 in becomes 0.5 in on each side.
- What does “does not fit in this orientation” mean?
- The product is too big along at least one axis the way you entered it, but turned another way it fits. Choose the roomiest orientation to see the clearances that way.
- How much of the box does the product fill?
- Divide the product’s volume by the box’s inside volume. 693 in³ in a 960 in³ box is 72.19%, leaving 267 in³ unused.
- Should the clearance be the same on every side?
- It doesn’t have to be, but a very uneven gap leaves room for the product to slide. Turning it to the roomiest orientation often evens out the tightest side.
- Are the sizes, weights, and prices I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your sizes, weights, prices, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


