Shipping & packaging
Why the Best Carton Orientation Depends on Height
The floor decides how many cartons fit in a layer; the height decides how many layers. Change the height limit and the winning position can change with it.
Ready to try the tool this guide describes?
Layers come in whole carton heights
With 54 in above the deck, an 8 in carton height gives 6 layers and a 14 in height gives 3. Drop to 42 in and the 8 in side gives only 5 layers, while the 14 in side still gives 3 — exactly 42 in.
The same carton, two height limits
On a 48 × 40 in pallet with a 6 in deck, a 20 × 14 × 8 in carton fits 36 upright-turned under a 60 in limit. Under a 48 in limit, upright-turned falls to 30, and on its side turned keeps 36 by using exactly the 42 in available.
Two limits compared
| Maximum loaded height | Upright, turned | On its side, turned | Best (any way) |
|---|---|---|---|
| 60 in (54 in above the deck) | 36 | 36 | Upright, turned — 36 |
| 48 in (42 in above the deck) | 30 | 36 | On its side, turned — 36 |
On a shelf
In a 36 × 24 × 18 in shelf space, a 12 × 10 × 8 in carton fits 12 upright either way round, with 2 in to spare above; on its side it fits 9. The height leaves room for only two upright layers, so the floor pattern decides.
What to take from it
- Recheck the best position whenever the height limit changes.
- A position that leaves headroom isn’t wasted if it fits more cartons.
- Carton stack height and loaded height differ by the pallet deck.
Orientation and Height FAQ
- Why did my best orientation change when the height limit changed?
- Because each position uses a different carton side as its height, and whole layers fit differently under each limit.
- Is leftover headroom always wasted?
- Not if another position would fit fewer cartons. Headroom only matters when it could hold another layer.
- What is the difference between carton stack height and loaded height?
- Carton stack height is the cartons alone; loaded height adds the pallet deck underneath.
- Do I count the pallet in the height limit?
- Most loaded-height limits include the pallet, so take the deck height off before counting layers.
- Which height should I plan to?
- The lowest limit the load will meet — a door, a trailer, a rack, or a carrier rule — whichever is tightest.
Related guides
- Comparing Carton OrientationsHow to compare the six ways a carton can face on a pallet or in a space — counts, layers, space left on each side, and stack height.
- Carton Orientation LimitsHow carton markings, contents, and a weight limit narrow the ways a carton can face in a load, and what that does to the count.
- Calculating Stack HeightHow to work out a loaded pallet’s height and the most layers under a height limit, with inch and millimeter examples and the room left over.
Open the tool
Jump into Carton Orientation Calculator when you are ready to process your files.


