Shipping & packaging
How to Compare Carton Orientations in a Load
A carton has three sides, and any of them can point along, across, or up. That makes six ways it can face, and they rarely fill a space equally well.
Ready to try the tool this guide describes?
The six positions
- Upright, and upright turned 90°: the height stays up.
- On its side, and on its side turned 90°: the width points up.
- On its end, and on its end turned 90°: the length points up.
Count each one the same way
For each position, divide the space’s length by the carton side along it, the width by the side across it, and the usable height by the side up, rounding each down. Multiply the three for the count.
A 20 × 14 × 8 inch carton on a 48 × 40 inch pallet
With 54 in of height above a 6 in deck, upright gives 2 × 2 × 6 = 24, but turned 90° it gives 3 × 2 × 6 = 36. On its side turned 90° also gives 36 — 6 × 2 × 3 — so two positions tie.
All six compared
| Position | Along × across × layers | Count | Carton stack | Space left (along / across / up) |
|---|---|---|---|---|
| Upright | 2 × 2 × 6 | 24 | 48 in | 8 / 12 / 6 in |
| Upright, turned | 3 × 2 × 6 | 36 | 48 in | 6 / 0 / 6 in |
| On its side | 2 × 5 × 3 | 30 | 42 in | 8 / 0 / 12 in |
| On its side, turned | 6 × 2 × 3 | 36 | 42 in | 0 / 0 / 12 in |
| On its end | 3 × 5 × 2 | 30 | 40 in | 6 / 0 / 14 in |
| On its end, turned | 6 × 2 × 2 | 24 | 40 in | 0 / 12 / 14 in |
Breaking a tie
When two positions give the same count, prefer the upright one, then the lower stack. Here upright-turned wins: it stays upright, even though on its side turned leaves 12 in of headroom against 6 in.
Comparing Carton Orientations FAQ
- What does turned 90° mean for a carton?
- The carton is rotated a quarter turn on the spot, so its length and width swap directions while the same side stays up.
- Why do the positions give such different counts?
- Each puts a different side against each dimension of the space, and the leftover strips are different in each case.
- Which position wins when two counts are equal?
- Prefer upright positions, then the one with the lower stack, then whichever comes first in the list.
- Does overhang change the comparison?
- It can. With 1 in of overhang allowed on each edge of the 48 × 40 in pallet, upright rises from 24 to 36 — if you accept overhang at all.
- Can mixing positions fit more?
- Sometimes, by placing some cartons one way and the rest another in the same layer. Compare single positions first, then try mixed layers.
Related guides
- Carton Orientation LimitsHow carton markings, contents, and a weight limit narrow the ways a carton can face in a load, and what that does to the count.
- Orientation and HeightWhy changing a height limit can change which way a carton should face, with worked pallet and shelf examples.
- Mixed-Orientation LayersHow two-block pallet layer patterns work, when mixing carton orientations fits more than a single orientation, and the limits of checking only these patterns.
- Turning Cartons on Their SideWhen standing cartons on a side or end fits more on a pallet, when it doesn’t, and why markings, contents, and carton strength come first.
Open the tool
Jump into Carton Orientation Calculator when you are ready to process your files.


