Illustration of a wheel cut in half showing its centerline and its mounting face

Vehicles & EVs

What Is Wheel Offset and How Is It Measured?

Wheel offset is the distance between the middle of the wheel and the surface that bolts to the hub. It decides where the wheel sits in the wheel well — how far in, and how far out.

Ready to try the tool this guide describes?

The two reference points

  • The centerline: the line halfway across the wheel’s width.
  • The mounting face: the flat surface that sits against the vehicle’s hub.
  • Offset is the distance between them, usually given in millimeters.

Reading the marking

Offset is often cast or stamped on the wheel as ET followed by a number — ET35 means +35 mm. ET comes from the German Einpresstiefe, roughly “press-in depth”. A plus or no sign means positive; a minus sign means negative.

Measuring it yourself

  1. Lay the wheel face down and put a straightedge across the back flange.
  2. Measure from the straightedge down to the mounting face: that is the backspacing.
  3. Measure the overall width, flange edge to flange edge, and halve it to find the centerline.
  4. Offset = backspacing − half the overall width.

A worked example

An 8-inch wheel measures 9 inches across its flanges, so its centerline is 4.5 inches from the back edge. With 6 inches of backspacing, the mounting face is 1.5 inches past the centerline toward the street side: an offset of +38.1 mm.

Why it matters

Offset, together with width, sets how close the wheel comes to the suspension on the inside and the fender on the outside. It also affects steering feel, because it moves the tire relative to the steering axis. Vehicle makers specify an offset range for each model; the wheel’s bolt pattern, center bore, and load rating have to match too.

What Wheel Offset Is FAQ

What is wheel offset in simple terms?
How far the wheel’s mounting face sits from the middle of the wheel, in millimeters. It sets how far in or out the wheel sits.
What does ET45 mean on a wheel?
An offset of +45 mm: the mounting face is 45 mm toward the street side of the centerline.
How do I measure offset without markings?
Measure the backspacing and the overall width, then subtract half the overall width from the backspacing.
Is offset the same as backspacing?
No. Backspacing is measured from the back edge; offset from the centerline. They are linked through the wheel’s width.
Does offset change the tire size I can use?
Indirectly: it moves where the tire sits, so it changes clearance on both sides. The tire size itself doesn’t change.

Related guides

Open the tool

Jump into Wheel Offset Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.