Shipping & packaging
How to Calculate Pallet Cube Utilization
Pallet cube utilization answers one question: of the space you are allowed to fill above the pallet, how much did the load fill?
Ready to try the tool this guide describes?
Find the space you are allowed
Start from the maximum loaded height — your limit, pallet included — and take off the deck height. A 60 in limit over a 6 in deck leaves 54 in. Multiply by the pallet’s length and width: 48 × 40 × 54 = 103,680 in³, which is 60 ft³.
Measure what the load fills
Measure the load’s outline above the deck: its length, its width, and its height from the deck to the top. A load 48 × 40 in and 40 in tall fills 76,800 in³.
Divide
76,800 ÷ 103,680 = 74.07%. The other 26,880 in³ — 15.56 ft³ — is space under the limit that the load doesn’t use.
Worked examples
| Pallet | Deck | Height limit | Load outline | Utilization |
|---|---|---|---|---|
| 48 × 40 in | 6 in | 60 in | 48 × 40 × 40 in | 74.07% |
| 48 × 40 in | 6 in | 60 in | 48 × 40 × 30 in | 55.56% |
| 1,200 × 800 mm | 144 mm | 1,600 mm | 1,200 × 800 × 1,000 mm | 68.68% |
Common slips
- Forgetting to take the deck height off the limit.
- Measuring the load’s height from the floor instead of from the deck.
- Counting load that hangs past the deck edges as used cube.
Calculating Pallet Cube Utilization FAQ
- How much cube is there on a 48 × 40 inch pallet?
- It depends on your height limit. With a 6 in deck and a 60 in limit the allowance is 54 in, so the cube is 103,680 in³, or 60 ft³.
- Does the pallet deck count as used cube?
- No. The deck height comes off first; utilization only measures the space above it.
- How do I work out pallet cube in cubic meters?
- Multiply the sizes in meters. A 1,200 × 800 mm pallet with 1,456 mm of height allowance has 1.2 × 0.8 × 1.456 = 1.398 m³.
- What is a good pallet cube utilization?
- There is no single number. It depends on the product, the carton sizes, and the limits you load to, so use it to compare loads of the same product.
- Does load hanging over the deck count?
- Not as used cube. The overhanging part is outside the space above the deck, so it is reported separately.
Related guides
- Carton Volume vs Load EnvelopeTwo ways to measure how much of a pallet’s cube a load uses — its outer envelope or the cartons’ own volume — and what the gap between them means.
- Why Pallet Cube Stays Under 100%Three measurable reasons a full-looking pallet uses less than its whole cube — the height remainder, the footprint remainder, and gaps — with worked numbers.
Open the tool
Jump into Pallet Cube Utilization Calculator when you are ready to process your files.


