Illustration of a battery outline filling from a low level to a higher level with a wall outlet on the left

Vehicles & EVs

How Many kWh Does It Take to Charge an EV?

The energy a charge takes depends on how much of the battery you fill, not on the size of the battery alone — and the meter always counts a little more than the battery receives.

Ready to try the tool this guide describes?

Count the charge you add

Most drivers don’t charge from empty to full. A typical home top-up runs from somewhere around 20–30% back up to 80% or 90%. The energy that takes is the usable capacity times the percentage points added: a 75 kWh usable battery going from 20% to 80% takes 75 × 60% = 45 kWh.

A full charge from 0% to 100% is the same arithmetic with all 100 points, so the same battery would take 75 kWh. Running a battery to 0% is rare, which is why the charge you actually add is the useful number.

The meter reads more than the battery receives

Some electricity is lost as heat on the way into the battery. At 90% charging efficiency, the 45 kWh the battery takes needs 45 ÷ 0.9 = 50 kWh from the grid, so 5 kWh is lost. Your bill counts the 50 kWh.

Keep the two numbers apart. The battery figure is what you can drive on; the grid figure is what you pay for.

Energy for common charges

Each row assumes 90% charging efficiency.

Energy for common charges comparison
Usable batteryChargeAt the batteryFrom the grid
40 kWh0% → 100%40 kWh44.44 kWh
60 kWh20% → 80%36 kWh40 kWh
75 kWh20% → 80%45 kWh50 kWh
82 kWh10% → 90%65.6 kWh72.89 kWh
100 kWh30% → 80%50 kWh55.56 kWh

What changes the answer

  • Usable capacity: a battery’s usable figure is smaller than its total size, and it shrinks a little as the battery ages.
  • Charging efficiency: slow 120 V charging and very cold weather usually lose more than a warm Level 2 charge.
  • Battery heating: in winter the car may warm the battery while plugged in, which draws grid electricity that doesn’t end up stored.
  • Where you stop: charging to 100% takes more energy than charging to 80%, and the last part of the charge is slower.

From kWh to driving

To see what a charge means in miles, multiply the battery energy by your car’s miles per kWh. 45 kWh at 3.5 mi/kWh is 157.5 miles. Going the other way, a 40-mile commute at 3.5 mi/kWh uses about 11.43 kWh from the battery, or 12.7 kWh from the grid at 90% efficiency.

kWh to Charge an EV FAQ

How many kWh does it take to fully charge a 75 kWh EV battery?
From 0% to 100%, 75 kWh goes into the battery. At 90% charging efficiency that is about 83.33 kWh from the grid.
How many kWh does a daily commute need?
Divide the distance by your miles per kWh. A 40-mile round trip at 3.5 mi/kWh uses about 11.43 kWh from the battery, which takes about 12.7 kWh from the grid at 90% efficiency.
Does a bigger battery take more electricity to charge?
Only if you add more energy. Adding 30 kWh to a 60 kWh battery or a 100 kWh battery takes the same 30 kWh; the bigger battery just has more room left.
Why does my charger app show more kWh than my car?
The charger or meter counts electricity from the grid, and the car counts energy added to the battery. The difference is the charging loss.
Is it worth charging to 100% every time?
For daily driving many carmakers suggest a lower everyday limit, such as 80% or 90%, and charging to 100% before long trips. Check your car’s own recommendation.

Related guides

Open the tool

Jump into EV Charge Session Energy Needed (kWh) Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.