Illustration of a battery pack with a thin shaded band at the top and bottom set aside from the usable middle

Vehicles & EVs

Usable vs Total EV Battery Capacity Explained

Many EVs list two battery sizes. The smaller, usable figure is the one that belongs in charging and range calculations.

Ready to try the tool this guide describes?

Two capacity figures

Total (or gross) capacity is everything the cells could store. Usable (or net) capacity is the part the car lets you charge and discharge. The gap is a buffer the car keeps in reserve, and it is often a few kWh.

When a spec sheet gives one number without saying which, it may be either. Look for “usable” or “net” before you use it in a calculation.

Why carmakers keep a buffer

  • Charging cells to their absolute maximum or draining them completely wears them faster, so a margin at both ends helps the battery last.
  • A small reserve below 0% on the display leaves room to reach a charger.
  • Headroom at the top can let regenerative braking recover energy even when the display reads full.

What happens if you use the total figure

Take a pack sold as 84 kWh total with 80 kWh usable, at 3.5 mi/kWh.

What happens if you use the total figure comparison
CalculationWith 84 kWh (total)With 80 kWh (usable)
Energy, 20% → 80%50.4 kWh48 kWh
Full-battery range294 miles280 miles

The total figure overstates both the energy a charge adds and the range a full battery gives.

Battery health lowers usable capacity

Usable capacity shrinks slowly as a battery ages. A battery at 90% state of health holds about 90% of its original usable energy: 80 kWh becomes 72 kWh, and range at 3.5 mi/kWh drops from 280 to 252 miles. Charging energy for a given percentage window drops in step, because each percent now holds less.

Where to find the usable figure

  • The owner’s manual or the carmaker’s technical specifications.
  • An energy or battery-health screen in the car or its app, where available.
  • A charge from a low percentage to full, comparing the car’s energy-added figure with the percentage gained.

Usable vs Total Battery Capacity FAQ

What is the difference between usable and total battery capacity?
Total capacity is what the cells can store; usable capacity is the part the car lets you use. The rest is a protective buffer.
Which capacity should I use to work out charging energy?
Usable. The percentages on the display are shares of usable capacity.
How big is the buffer?
It varies by car. It is commonly a few kWh, and some cars keep more at the top than the bottom.
Does the buffer get used as the battery ages?
Some cars adjust how they manage the buffer over time, but you can’t rely on it. Base calculations on the usable capacity the car reports now.
How do I estimate usable capacity on an older car?
Note the energy added during a large charge and divide by the percentage points gained, then multiply by 100. 36 kWh added over 50 points means about 72 kWh usable.

Related guides

Open the tool

Jump into EV Charge Session Energy Needed (kWh) Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.