Vehicles & EVs
How to Calculate Speedometer Error After Changing Tires
Speedometer error after a tire change is a ratio: the new tire’s diameter over the original’s. Multiply the indicated speed by it and you have the actual speed.
Ready to try the tool this guide describes?
The formula
- Find both overall diameters, from the tire sizes or the maker’s specifications.
- Ratio = new diameter ÷ original diameter.
- Actual speed = indicated speed × ratio.
- Error = (ratio − 1) × 100%, positive when you are going faster than shown.
Example: 25-inch to 27-inch tires
The ratio is 27 ÷ 25 = 1.08. At an indicated 60 mph the vehicle is doing 60 × 1.08 = 64.8 mph — 4.8 mph faster than shown, an 8% difference. The odometer is off by the same 8%: every 100 miles it shows, the vehicle has actually driven 108.
Example: from tire sizes
A 225/65R17 is about 28.52 inches tall and a 235/60R18 about 29.1 inches, a ratio of about 1.0206. An indicated 60 mph is about 61.2 mph, and an indicated 100 km/h is about 102.1 km/h.
Going smaller works the same way. A 245/45R18 is about 26.68 inches tall, so in place of a 225/65R17 the ratio is about 0.9357: an indicated 60 mph is about 56.1 mph, 6.43% slower than shown, and every 100 miles on the odometer is about 93.57 actual miles.
Stating the error clearly
The calculator states the error as how much higher or lower the actual speed is than the indicated speed. Some sources divide by the actual speed instead, which gives a slightly different percentage for the same tires — 4.8 ÷ 64.8 is 7.4% rather than 8%. Either way, quote the actual speed at a familiar reading; it is the clearest figure.
Before you rely on it
- The result assumes the speedometer was accurate with the original tires; many read slightly high from the factory.
- Tread wear, inflation, and load move real readings a little.
- A GPS speed check confirms the actual reading on your vehicle.
Calculating Speedometer Error FAQ
- How do I calculate my actual speed with bigger tires?
- Multiply the speedometer reading by the new tire diameter divided by the original. With 27-inch tires replacing 25-inch ones, 60 mph indicated is 64.8 mph.
- How do I work out the percentage error?
- Divide the new diameter by the original, subtract 1, and multiply by 100. 27 ÷ 25 gives an 8% difference.
- Does the formula work in km/h?
- Yes — the ratio has no units. An indicated 100 km/h with a 2.06% larger tire is about 102.1 km/h.
- How much does the odometer change?
- By the same ratio. With an 8% larger tire, the vehicle drives 108 miles for every 100 the odometer records.
- Can I use circumferences instead of diameters?
- Yes. The ratio of circumferences is the same as the ratio of diameters.
Related guides
- Tire Size and SpeedometersWhy a speedometer depends on tire size, why taller tires make it read low and smaller tires make it read high, and what else moves the reading.
- Larger vs Smaller TiresTables of actual speed at common speedometer readings for tires 3% and 5% larger or smaller, in mph and km/h, and what each direction means on the road.
Open the tool
Jump into Speedometer Error Calculator when you are ready to process your files.


