EV Charger Amps to kW Calculator
Choose the voltage and enter the charger’s current — or the breaker rating — to see the charging power in kilowatts and watts, with your car’s own limit applied.
EV Charger Amps to kW Calculator calculates in your browser.
Charging power from volts and amps, and which amps to use
Home EV chargers are usually described in amps, while cars and charging times are described in kilowatts. Converting between them is one multiplication: volts times amps, divided by 1,000.
The catch is which amps figure you have. A charger’s current setting is the continuous current it supplies; a circuit breaker’s rating is higher, because a continuous load such as EV charging normally draws no more than 80% of it. This calculator applies that 80% once — only when you start from the breaker — and then caps the result at your car’s maximum AC charging power.
How to use the EV Charger Amps to kW Calculator
- Choose whether you know the charger’s current setting or the circuit breaker rating.
- Choose the voltage: 120 V, 208 V, 240 V, or another single-phase voltage.
- Enter the amps.
- Optionally enter your car’s maximum AC charging power to see what it will actually draw.
How the calculation works
Charging current = charger current, or breaker rating × 80% (applied once)
Power (W) = volts × amps
Power (kW) = watts ÷ 1,000
Charging power = the lower of that and the car’s maximum AC charging power
Charging power here is the AC power drawn from the charger; the energy stored in the battery is a little less, because charging loses some as heat.
| Voltage | Amps | Car limit | Charging power |
|---|---|---|---|
| 240 V | 32 A charger | — | 7.68 kW |
| 120 V | 12 A charger | — | 1.44 kW |
| 208 V | 40 A breaker (32 A) | — | 6.66 kW |
| 240 V | 48 A charger | 7.2 kW | 7.2 kW |
Calculated on your device
- The calculation runs in your browser as you type; nothing is sent to a server.
- Your battery figures, rates, and results are not sent to Looty Tools or stored.
- The calculator area is masked from session-recording analytics.
Limitations
- Single-phase power only (volts × amps); three-phase supplies aren’t covered.
- Uses the nominal voltage you choose; real voltage varies a little and drops under load.
- It converts amps to power — it doesn’t size breakers, wire, or panels. A licensed electrician sizes and installs charging circuits to your local code.
- The car’s limit is treated as the most AC power it draws; check your car’s specifications.
Related calculators
- EV Charge Session Energy Needed (kWh) CalculatorEstimate the kilowatt-hours a charging session needs.
- EV Charging Loss CalculatorEstimate energy lost while charging.
- EV Charging Miles Per Hour CalculatorEstimate how many miles an EV gains per hour of charging.
- 120V vs 240V EV Charging Time CalculatorCompare EV charging time on 120V and 240V.
Guides
- Charger Amps to KilowattsConvert EV charger amps to kilowatts with volts × amps ÷ 1,000, with a table for 120 V, 208 V, and 240 V chargers and what the car’s own limit changes.
- 32-Amp Charger PowerWhat a 32-amp EV charger delivers at 240 V and 208 V, how much energy and range an overnight session adds, and when the car limits it.
- Charging Amps vs Breaker AmpsWhy an EV charger’s current is lower than its circuit breaker’s rating, how the 80% continuous-load rule works, and the mistake of applying it twice.
EV Charger Amps to kW Calculator FAQ
- How do I convert EV charger amps to kW?
- Multiply volts by amps and divide by 1,000. A charger supplying 32 A at 240 V delivers 240 × 32 ÷ 1,000 = 7.68 kW.
- How many kW is a 40-amp breaker?
- A charger on a 40 A breaker is usually set to draw at most 80% of it, or 32 A. At 240 V that is 7.68 kW. The 80% applies to the breaker rating, not to a current that is already the charger’s output.
- Why does my car charge slower than the charger’s rating?
- The car’s onboard charger sets a maximum AC charging power. A 48 A charger at 240 V can supply 11.52 kW, but a car limited to 7.2 kW only draws 7.2 kW.
- What about 208 V?
- Many apartment and commercial buildings supply 208 V. The same 32 A then gives 6.66 kW instead of 7.68 kW.
- Does this tell me what breaker or wire I need?
- No. It converts amps to power. Circuit sizing depends on your charger, wiring, panel, and local electrical code, so have a licensed electrician size and install the circuit.
- Are the battery figures and rates I enter sent anywhere?
- No. The calculation runs in your browser as you type. Your battery sizes, efficiency figures, electricity rates, and results are not sent to Looty Tools or stored, and the calculator area is masked from session-recording analytics. Refreshing the page clears it.


