Vehicles & EVs
What Does a 3.73 Final Drive Ratio Mean?
A 3.73 final drive — often written 3.73:1 or called “3.73 gears” — means the driveshaft turns 3.73 times for every turn of the wheels. It is a common axle ratio on pickups and SUVs, sitting between taller highway ratios and shorter towing ratios.
Ready to try the tool this guide describes?
Turns and teeth
The number comes from the gear teeth. A ring gear with 41 teeth driven by an 11-tooth pinion gives 41 ÷ 11 ≈ 3.727, rated as 3.73. The ratio is the same whether the vehicle is moving fast or slowly — it is a fixed tooth count.
What 3.73 does at 60 mph
On 225/65R17 tires the wheels turn about 707 rpm at 60 mph, so a 3.73 final drive spins the driveshaft at about 2,638 rpm. In a 1.00 direct-drive gear the engine turns at the same 2,638 rpm; in a 0.70 overdrive it turns about 1,847 rpm.
“Higher” and “lower” gears
People call a numerically larger ratio a “lower” or “shorter” gear. Compared with 3.73, a 4.10 is lower: the driveshaft — and engine — turn about 9.92% faster at the same speed, trading cruising rpm for pulling power. A 3.42 is higher (taller): slower driveshaft speed and lower rpm on the highway.
Where to find your ratio
- A metal tag on a differential cover bolt.
- The axle code on the build sheet, door sticker, or service records.
- Counting driveshaft turns while both drive wheels, raised off the ground, are turned together exactly once.
What 3.73 Gears Mean FAQ
- Is 3.73 good for towing?
- It is a middle ratio. Many trucks offer it as a compromise between highway rpm and pulling power; your vehicle’s towing ratings and gearing options decide what is suitable.
- Does 3.73 mean the engine turns 3.73 times per wheel turn?
- Only in a 1.00 gear. In other gears multiply 3.73 by the gear ratio — in a 0.70 overdrive the engine turns about 2.61 times per wheel turn.
- Are 3.73 gears faster than 3.42?
- They give quicker acceleration in each gear but a higher cruising rpm. Top speed depends on power and gearing together.
- Why is it 3.73 and not a round number?
- Gear sets use tooth counts that don’t share common factors, so the teeth meet evenly over time. 41 and 11 give 3.727.
- Does the ratio change with tire size?
- No, the ratio is fixed. A different tire size changes wheel rpm at a given speed, and the effective gearing changes with it.
Related guides
- Final Drive and Driveshaft RPMHow the axle ratio sets driveshaft speed for a given wheel speed, with driveshaft rpm for five common ratios and the percentage change when you swap gears.
- Final Drive vs Gear RatioHow the transmission gear and the final drive work together, why their product is the overall ratio, and which one to change for lower highway rpm.
- Gear Ratios and Engine RPMWhy low gears spin the engine fast and overdrive gears let it turn slower than the driveshaft, with road speeds at 3,000 rpm across an example six-speed.
Open the tool
Jump into Final Drive RPM Calculator when you are ready to process your files.


