Shipping & packaging
How to Choose a Case Pack Quantity
The most units that fit in a case is a starting point, not always the right pack quantity. Weight, how customers order, and what happens to the last case can all argue for a different number.
Ready to try the tool this guide describes?
Fit sets the ceiling
Begin with the most that fit. In the 16 × 12 × 10 in case, small 3.75 × 2.5 × 4.5 in units fit 40 when laid on their side, so no pack quantity above 40 works in that case.
Weight can set a lower ceiling
At 0.6 lb a unit and 1.2 lb for the empty case, a 25 lb limit allows (25 − 1.2) ÷ 0.6 = 39.7, so 39 units — one fewer than fit. The limit is yours to set, from handling or carrier rules you work to.
Match how orders arrive
If customers order in dozens, a case of 36 ships three dozen with nothing left over, while a case of 40 splits a dozen across two cases. A quantity that divides your common order sizes saves opening and repacking cases.
Watch the last case
An order rarely divides evenly. 1,000 units at 36 per case need 28 cases, and the last holds only 28. At 40 per case, 1,000 units fill exactly 25 cases.
Comparing quantities
| Units per case | Cases for 1,000 units | Units in the last case | Fits three dozen evenly? |
|---|---|---|---|
| 36 | 28 | 28 | Yes |
| 39 | 26 | 25 | No |
| 40 | 25 | 40 | No |
Choosing a Case Pack Quantity FAQ
- Should a case pack always be as full as possible?
- Not always. A slightly smaller quantity can match order sizes, stay under a weight limit, or leave room for protection.
- What is a good case weight?
- One that suits how your cases are handled. Set the limit from your own handling rules or your carrier’s, then check the pack quantity stays under it.
- Why do retailers ask for particular case quantities?
- Their shelves, ordering systems, and stores often work in set multiples, and a case that matches avoids splitting cases.
- What happens to a part-full last case?
- It ships with empty space that needs filling. Choosing a quantity that divides your usual order size reduces how often that happens.
- Can I change the case to fit a better quantity?
- Yes — sometimes a slightly different case fits a quantity that divides orders neatly. Compare the options before committing to a size.
Related guides
- Units per CaseWork out how many identical products fit in a shipping case: units per layer, layers, which way up, padding, and spacing, with worked examples.
- Case Pack vs Inner PackWhat case packs, inner packs, and master cartons are, how they nest inside each other, and how to count units at each level.
- Height vs Weight LimitsHow to tell whether a pallet load is limited by height or by weight, how partial top layers happen, and what changes when each limit applies.
Open the tool
Jump into Case Pack Calculator when you are ready to process your files.


