Illustration of an open shipping case seen from above, packed with rows of small product boxes

Shipping & packaging

How to Calculate How Many Units Fit in a Case

Units per case is a layer count times a layer count, and the arithmetic is simple once you know the inside of the case, the size of one unit, and which way up the unit may go.

Ready to try the tool this guide describes?

Start from the inside of the case

Use the case’s inside length, width, and height. Outside sizes include the board, and a case of single-wall board loses a few millimeters on every side; guessing it from the outside is a common reason a case pack comes out one row short.

Count one layer, then the layers

In a 16 × 12 × 10 in case, 3.75 × 2.5 × 4.5 in units standing upright fit 18 to a layer when they are turned so their 2.5 in side runs along the 16 in length. The 10 in height takes two 4.5 in layers, so the case holds 36.

Let the unit lie down if it can

If the product can travel on its side, the 2.5 in side becomes the height: four layers fit in 10 in. With 10 units in each of those layers, the same case holds 40 — four more than upright.

Take off padding and spacing first

Padding sits on every face of the case, top and bottom included, and dividers add a gap between units. With ¼ in of padding and ⅛ in between units, the usable space shrinks to 15.5 × 11.5 × 9.5 in and the upright count drops to 34.

Worked examples

Worked examples comparison
Case (inside)UnitRulesPer layer × layersUnits
16 × 12 × 10 in3.75 × 2.5 × 4.5 inUpright18 × 236
16 × 12 × 10 in3.75 × 2.5 × 4.5 inAny way10 × 440
16 × 12 × 10 in3.75 × 2.5 × 4.5 inUpright, ¼ in padding, ⅛ in spacing17 × 234
16 × 12 × 10 in4 × 3 × 2 inUpright16 × 580

Units per Case FAQ

Do I use the inside or outside size of a shipping case?
The inside. The units go inside the case, and the board takes up room on every side.
How many 3.75 × 2.5 × 4.5 inch units fit in a 16 × 12 × 10 inch case?
36 standing upright, or 40 if they may lie on their side.
Why not divide the case volume by the unit volume?
That ignores the strips along the walls and above the top layer that can’t hold a whole unit. In the example it gives 45, while 36 actually fit upright.
Can the volume figure ever be reached?
Yes, when the unit divides the case exactly: 4 × 3 × 2 in units fill a 16 × 12 × 10 in case with 80, exactly its volume ÷ the unit’s.
Should I test-pack a case before ordering?
Yes. Real products bulge, flaps intrude, and inserts take room, so pack one case before you order a thousand.

Related guides

Open the tool

Jump into Case Pack Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.