Illustration of a product and an open box with their sides listed longest to shortest and matched in pairs

Shipping & packaging

How to Check if a Product Fits in a Box

Checking whether something fits in a box is easy to get wrong by eye or by volume. A dependable method for rectangular products needs only the three sides of each and a sort.

Ready to try the tool this guide describes?

Measure the inside of the box

Use the box’s inside dimensions, measured wall to wall with the flaps open. Outside sizes include the board — single-wall corrugated is often about ⅛–3/16 in thick — so they make the box look bigger than it is.

Sort both sets of sides

  1. Write the product’s sides from longest to shortest.
  2. Write the box’s inside sides from longest to shortest.
  3. Compare them in pairs: longest with longest, middle with middle, shortest with shortest.
  4. If every product side is no bigger than its partner, it fits square-on, and the pairs tell you which way round.

Worked examples

Worked examples comparison
ProductBox (inside)Sorted comparisonFits?
11 × 9 × 7 in12 × 10 × 8 in11 ≤ 12, 9 ≤ 10, 7 ≤ 8Yes
4 × 6 × 16 in18 × 12 × 8 in16 ≤ 18, 6 ≤ 12, 4 ≤ 8Yes
20 × 6 × 4 in18 × 12 × 8 in20 > 18No
14 × 13 × 3 in16 × 12 × 10 in14 ≤ 16, 13 > 12No

Choosing the best way round

When more than one orientation fits, pick the one with the most room at its tightest point. The 4 × 6 × 16 in product fits an 18 × 12 × 8 in box as 16 × 6 × 4 in, with 2, 6, and 4 in to spare, or as 16 × 4 × 6 in, with 2, 8, and 2 in. Both are tightest at 2 in, but the first has 4 in rather than 2 in at its next-tightest axis, so it is the better choice.

When it must stay upright

Some products can’t go on their side. Then only the two orientations that keep the height vertical count: the product’s length and width can swap, but its height must fit the box’s height. Check those two pairings directly instead of sorting all three sides.

Checking Product-to-Box Fit FAQ

What is the easiest way to tell if something fits in a box?
Sort the product’s sides and the box’s inside sides from longest to shortest and compare them in pairs. If each product side is no bigger, it fits square-on.
Do I need to try every orientation?
Not to know whether it fits — the sorted comparison answers that. Trying the orientations helps you choose the one with the most room.
Why doesn’t a 14 × 13 × 3 inch item fit a 16 × 12 × 10 inch box?
Its middle side, 13 in, is longer than the box’s middle side, 12 in. Its longest side would fit, but no turn fits both.
Can I rely on a box’s listed size?
Only if it is stated as inside dimensions. Some listings give outside sizes, which include the board.
What if the product fits with no room to spare?
It may still go in, but small measuring errors and slightly undersized boxes can stop it. Measure again, and leave room for any protection it needs.

Related guides

Open the tool

Jump into Product-to-Box Fit Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.