Illustration of a tire sidewall with a row of raised characters highlighted by a magnifying glass

Vehicles & EVs

How to Read Tire Size Numbers and Measurements

A tire size packs several facts into one line, in two different units. Read left to right, P225/65R17 102H describes the tire’s type, its three key measurements, its construction, and its load and speed ratings.

Ready to try the tool this guide describes?

Part by part

Part by part comparison
PartIn P225/65R17 102HMeaning
PrefixPPassenger tire (LT is light truck; no prefix is usually a metric tire)
Width225Section width in millimeters
Aspect ratio65Sidewall height as a percentage of the width
ConstructionRRadial (ZR on some high-speed tires; D for bias-ply)
Wheel diameter17Wheel the tire fits, in inches
Load index102Maximum load per tire, from a standard table
Speed ratingHMaximum sustained speed category

Two units in one size

The width is in millimeters but the wheel diameter is in inches, and the aspect ratio is a percentage. Any calculation that combines them — sidewall height, overall diameter — has to convert at 25.4 mm to the inch.

The three measurements together

For 225/65R17 the sidewall is 146.25 mm (about 5.76 inches), the overall diameter about 28.52 inches, and the circumference about 89.58 inches. Those three figures — height, diameter, and circumference — are what most tire calculations need.

Load index and speed rating

The load index is a code, not a weight: 102 corresponds to 850 kg (about 1,874 lb) per tire in the standard table. The speed rating is a letter: H stands for 210 km/h (130 mph). Replacement tires should meet or exceed the ratings the vehicle maker specifies.

Other markings nearby

  • XL or Extra Load: a reinforced tire with a higher load capacity at a higher pressure.
  • The DOT code ends in four digits giving the week and year of manufacture — 2324 is the 23rd week of 2024.
  • Maximum pressure on the sidewall is a limit, not the recommended pressure; that is on the vehicle’s door-jamb placard.

Reading Tire Size Numbers FAQ

What does the R in a tire size mean?
Radial construction. It is not the radius.
Is the first number the tire’s height?
No — it is the width in millimeters. The height comes from the aspect ratio.
Why is the wheel size in inches when the width is in millimeters?
It is a convention from the history of tire sizing; wheel diameters have long been measured in inches.
What does 102H mean on a tire?
A load index of 102 (850 kg per tire) and an H speed rating (210 km/h, 130 mph).
How do I find a tire’s age?
Read the last four digits of the DOT code: week, then year.

Related guides

Open the tool

Jump into Tire Sidewall Height Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.