Illustration of a flexible tape measure going around a parcel the correct way, with a crossed-out tape going the long way around

Shipping & packaging

How to Measure Package Girth

There are two ways to get a box’s girth: wrap a flexible tape around it, or measure the three sides and calculate. Both give the same answer if you go the right way around — and that is where most measuring mistakes happen.

Ready to try the tool this guide describes?

Find the length first

Before measuring girth, decide which side is the length: always the longest side, however the box is labelled or lying. Girth is measured at right angles to that side, so getting the length wrong sends the tape the wrong way around.

Method 1: wrap a tape

  1. Use a flexible cloth or vinyl tape.
  2. Pass it around the box at its thickest point, at right angles to the length.
  3. Keep it flat against the box and pull it snug, not tight.
  4. Read where the tape meets its start.

Method 2: measure the sides

Measure all three outside sides, set the longest aside as the length, and double the sum of the other two. A box written down as 8 × 20 × 12 in has a length of 20 in and a girth of 2 × (12 + 8) = 40 in, whatever order the sides were noted in.

Going the wrong way around

Going the wrong way around comparison
Tape goes aroundReadsCorrect?
12 in and 8 in sides40 inYes — the girth
20 in and 8 in sides56 inNo — includes the length
20 in and 12 in sides64 inNo — includes the length

Bulges and rounding

  • Measure at the widest point, including a bulging side or a lid that doesn’t close flat.
  • Some carriers round each side up to a whole inch or centimeter first: an 18.4 × 10.2 × 6.5 in box would then count as 19 × 11 × 7 in, a girth of 36 in instead of 33.4 in.
  • Rounding to whole inches and to whole centimeters can give different results for the same box, so measure in the unit your carrier uses.

Measuring Package Girth FAQ

Which way do I wrap the tape to measure girth?
Around the box at right angles to its longest side, so the tape crosses only the two shorter sides.
Can I measure girth with a rigid tape measure?
It is easier to measure the three sides with a rigid tape and calculate: girth = 2 × (the two shorter sides).
Should I measure girth before or after packing?
After. Use the closed, taped box, because packing material and tape can make the sides bulge.
What if my box has a bulge?
Measure at the bulge. Girth is taken at the package’s thickest point.
Do I round each side or just the girth?
Follow your carrier’s rule, because the two give different answers: an 18.4 × 10.2 × 6.5 in box has a girth of 33.4 in, which rounds to 34 in — but 36 in if each side is rounded first.

Related guides

Open the tool

Jump into Package Girth Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.