Shipping & packaging
How to Find the Right Box Size for a Product
The right box is the smallest one that still holds the product and its protection. Finding it takes three measurements, a little arithmetic, and a short list of boxes you can actually get.
Ready to try the tool this guide describes?
Measure the product at its widest
Measure length, width, and height at the widest points, including handles, caps, or anything that sticks out. If a measurement falls between marks, take the larger one: a box that is a little too big works, one that is a little too small doesn’t.
Add padding to every side
Padding goes on both sides along each axis, so each dimension grows by twice the padding. An 11 × 9 × 7 in product with 0.5 in of padding needs at least 12 × 10 × 8 in inside — 960 in³.
Check boxes by side, not by volume
List the needed size and each box’s inside size longest first and compare them pair by pair. A box fits only if every side is at least as long as the matching needed side.
| Box (inside) | Volume | Against 12 × 10 × 8 in | Fits? |
|---|---|---|---|
| 15 × 10 × 6 in | 900 in³ | 15 ≥ 12, 10 ≥ 10, 6 < 8 | No |
| 12 × 10 × 8 in | 960 in³ | 12 ≥ 12, 10 ≥ 10, 8 ≥ 8 | Yes, exactly |
| 14 × 12 × 10 in | 1,680 in³ | 14 ≥ 12, 12 ≥ 10, 10 ≥ 8 | Yes |
Pick the smallest that fits
Of the boxes that fit, the one with the least inside volume is the right size. Here that is 12 × 10 × 8 in — half the 1,920 in³ of a 16 × 12 × 10 in box. Because it fits with nothing to spare, measure the product again before committing to it.
When to go a size up
- The product varies a little from one unit to the next.
- The smallest box fits with no room at all and the product is hard to get in.
- The product is fragile and needs more padding than you allowed.
Finding the Right Box Size FAQ
- What size box do I need for an 11 × 9 × 7 inch item?
- With 0.5 in of padding on every side, at least 12 × 10 × 8 in inside. Without padding, any box whose sides are at least 11, 9, and 7 in, matched longest to longest.
- Should I measure a box inside or outside for fit?
- Inside. The outside includes the board, which the product can’t use.
- Does a box with nearly the same volume always fit?
- No. A 15 × 10 × 6 in box holds 900 in³ against 960 in³ for 12 × 10 × 8 in, but its 6 in side can’t take an 8 in dimension.
- How much padding should I allow?
- It depends on the product and the material. Use the guidance from your packaging supplier or carrier, then add twice that amount to each dimension.
- What if no box I have fits exactly?
- Choose the smallest one that fits and fill the extra space so the product can’t move.
Related guides
- Minimum vs Stock Box SizesWhy the smallest box a product needs is a measurement, not a box you can buy, and how to choose between stock sizes and the extra space each leaves.
- Comparing Candidate BoxesA step-by-step way to compare the boxes you could use for one product: fit first, then volume, then how the room around the product is spread.
Open the tool
Jump into Right-Size Box Calculator when you are ready to process your files.


