Illustration of a product in an open box with the space around it shaded and labelled as fill volume

Shipping & packaging

How to Calculate Void Fill Volume

Void fill volume is the space your packing material has to take up around a product. It starts from the box’s empty space and ends with the share of that space you actually fill.

Ready to try the tool this guide describes?

Find the empty space

Multiply the box’s inside dimensions, multiply the product’s dimensions, and subtract. A 12 × 10 × 8 in box around an 11 × 9 × 7 in product leaves 960 − 693 = 267 in³.

Convert to the unit you work in

One cubic foot is 1,728 in³, and one cubic inch is exactly 16.387064 cm³.

Convert to the unit you work in comparison
Unit267 in³ is
Cubic feet0.1545 ft³
Cubic centimeters4,375 cm³
Liters4.375 L
Cubic meters0.004375 m³

Apply the share you fill

You rarely fill every cubic inch. Filling about three-quarters of the empty space gives 267 × 0.75 = 200.25 in³, about 0.1159 ft³ per package. The share is your own estimate — base it on test packs.

Several products

With several identical products, multiply one product’s volume by the quantity before subtracting, and check they actually fit: the empty space only means something if they do.

Common slips

  • Using outside box dimensions, which add the board’s thickness to the space.
  • Forgetting the product’s handles or other parts that stick out.
  • Treating the empty space as the amount of material to buy.

Calculating Void Fill Volume FAQ

What is void fill volume?
The volume your packing material needs to take up around a product: the empty space times the share you fill.
How many cubic feet of empty space does a 12 × 10 × 8 inch box have around an 11 × 9 × 7 inch item?
About 0.1545 ft³ (267 in³).
How do I convert cubic inches to liters?
Multiply by 0.016387. 267 in³ is about 4.375 L.
What share of the empty space should go into my volume estimate?
Enough that the product can’t move. Many packers don’t fill every corner, so set the share from what you see in test packs rather than assuming 100%.
Do I need the product’s exact volume?
For a rectangular product, its outside measurements are enough. For odd shapes a measured total volume gives a rough figure, but fit can’t be checked from it.

Related guides

Open the tool

Jump into Void Fill Volume Calculator when you are ready to process your files.

← Back to all guides

More from Looty

Explore Looty’s Ecosystem

Discover more ways Looty can help you learn, organize, create, and make an impact.