Vehicles & EVs
How to Calculate Tire Circumference
A tire’s circumference is the distance around its tread — how far the tire would roll in one full turn if it stayed perfectly round. You can get it from the size on the sidewall in three short steps.
Ready to try the tool this guide describes?
Three steps from the size
- Sidewall height (mm) = width × aspect ratio ÷ 100.
- Overall diameter (in) = wheel diameter + 2 × sidewall height ÷ 25.4.
- Circumference = π × overall diameter, in the same unit as the diameter.
A worked example: 225/65R17
The sidewall is 225 × 65 ÷ 100 = 146.25 mm, so the overall diameter is 17 + 2 × 146.25 ÷ 25.4 ≈ 28.52 inches. Multiplying by π (about 3.14159) gives a circumference of about 89.58 inches.
That is about 2,275.5 mm, 227.55 cm, or 7.465 feet. Convert from the unrounded inches each time — 1 inch is exactly 25.4 mm and 2.54 cm, and a foot is 12 inches.
Starting from a diameter you already know
Some tires — flotation sizes such as 33x12.50R15, or specifications that list an overall diameter — give you the diameter directly. Then there is only one step: a 30-inch tire has a circumference of π × 30 ≈ 94.25 inches.
Common sizes
| Tire size | Overall diameter | Circumference (in) | Circumference (mm) | Circumference (ft) |
|---|---|---|---|---|
| 205/55R16 | 24.88 in | 78.16 in | 1,985.2 mm | 6.513 ft |
| 225/65R17 | 28.52 in | 89.58 in | 2,275.5 mm | 7.465 ft |
| 245/40R18 | 25.72 in | 80.79 in | 2,052.1 mm | 6.733 ft |
| 265/70R17 | 31.61 in | 99.29 in | 2,522.1 mm | 8.275 ft |
| 275/60R20 | 32.99 in | 103.65 in | 2,632.7 mm | 8.637 ft |
What the figure is — and isn’t
This is the nominal, geometric circumference of an unloaded tire of that size. Tires from different makers vary slightly, and a tire carrying the car’s weight rolls a little less far per turn than its geometry suggests. Use it to compare sizes; for a tire you own, the maker’s published figures win.
Calculating Tire Circumference FAQ
- What is the formula for tire circumference?
- Circumference = π × overall diameter. From a metric size, first find the diameter: the wheel diameter plus two sidewalls, where each sidewall is the width times the aspect ratio.
- What is the circumference of a 225/65R17 tire?
- About 89.58 inches (2,275.5 mm), from a nominal diameter of 28.52 inches.
- How do I convert tire circumference to feet?
- Divide the inches by 12. A circumference of 89.58 inches is about 7.465 feet.
- Can I measure circumference with a tape?
- Yes — wrap a flexible tape around the center of the tread with the tire inflated and off the ground. It gives the unloaded circumference, which should be close to the calculated figure for a new tire.
- Does the wheel width change the circumference?
- Only slightly: a wider or narrower rim changes how the sidewall bulges, which shifts the measured size a little. The calculation uses the nominal size.
Related guides
- Diameter vs CircumferenceHow a tire’s diameter and circumference relate through π, why a small diameter change means a bigger circumference change, and which one each spec uses.
- Tread Wear and CircumferenceHow much circumference a tire loses as its tread wears from new to worn, what that does to revolutions per mile, and why it matters for matched sets.
Open the tool
Jump into Tire Circumference Calculator when you are ready to process your files.


