Shipping & packaging
How to Work Out How Many Pallets Fit in a Container
Counting pallets into a container takes four checks, in order: the floor, the height, the door, and the weight. Skipping one is how a plan comes up short at the dock.
Ready to try the tool this guide describes?
1. Floor positions
Divide the inside length and width by the pallet’s footprint each way, rounding down. In an example container 474 × 92 in inside, 48 × 40 in pallets fit 9 × 2 = 18 with their length along the container, or 11 × 1 = 11 turned. One straight row beside one turned row fits 9 + 11 = 20.
2. Tiers
If the pallets can be stacked, divide the inside height by the loaded pallet height and round down. Under a 94 in ceiling, 44 in pallets go two high and 60 in pallets only one. Whether a pallet can carry another is a question for the load and its packaging, not the ceiling.
3. The door
Each pallet goes in through the doors, usually facing the way it will sit. The side facing the opening has to be narrower than the door, and the loaded height lower than it. The door opening is smaller than the inside, so check it separately.
4. Weight
Multiply the pallet count by the gross weight of one loaded pallet and compare it with the container’s payload. At 1,500 lb each, 40 stacked positions would need 60,000 lb; a 40,000 lb payload allows only 26 pallets, however much space is left.
Worked examples
| Container inside | Loaded pallet | Tiers | Pallets |
|---|---|---|---|
| 474 × 92 × 94 in | 48 × 40 in, 60 in high | 1 | 20 |
| 474 × 92 × 94 in | 48 × 40 in, 44 in high, stacked | 2 | 40 |
| 474 × 92 × 94 in | 48 × 40 in, 44 in high, stacked, 1,500 lb each, 40,000 lb payload | 2 (top tier partial) | 26 |
Use your container’s own numbers
Inside sizes, door openings, and payloads vary between containers that share a name, so take them from your container’s specification or measure them. The sizes in this guide are examples, not standards.
How Many Pallets Fit in a Container FAQ
- Why use inside dimensions instead of the container’s size name?
- Pallets go inside, so only the inside length, width, and height matter. A size name describes the outside of the box, not the space within it.
- Does the method change for pallets of an unusual size?
- No. Use the pallet’s actual footprint and loaded height; the four checks are the same.
- Can pallets be stacked in a container?
- Only if the load and its packaging can carry another pallet. The ceiling height may allow a second tier when the load can’t.
- How much room should be left between pallets?
- Whatever your securing method needs. Enter it as spacing and every pair of pallets is kept that far apart.
- How do I tell what limits the pallet count?
- Work out all of them: floor positions × tiers for space, and payload ÷ weight per pallet for weight. The smallest one sets the count.
Related guides
- Straight, Turned, and Mixed RowsHow the direction pallets face changes how many fit across a container’s width, why one straight row beside one turned row often wins, and when it doesn’t.
- Pallets and the Container DoorWhy a pallet that fits inside a container can still meet the door frame, what the door has to clear in each orientation, and what a size check leaves out.
Open the tool
Jump into Pallets Per Container Calculator when you are ready to process your files.


